Lancom Systems LS61465 Informacje Techniczne Strona 53
- Strona / 244
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
LANCOM ES-2126+ und LANCOM ES-2126P
쮿 Chapter 4: Operation of Web- based Management
52
EN
왏 Rx Multicast Packets: Show the counting number of the received mul-
ticast packet.
왏 Rx Pause Packets: Show the counting number of the received pause
packet.
왏 Tx Collisions: Number of collisions transmitting frames experienced.
왏 Tx Single Collision: Number of frames transmitted that experienced
exactly one collision.
왏 Tx Multiple Collision: Number of frames transmitted that experienced
more than one collision.
왏 Tx Drop Packets: Number of frames dropped due to excessive colli-
sion, late collision, or frame aging.
왏 Tx Deferred Transmit: Number of frames delayed to transmission due
to the medium is busy.
왏 Tx Late Collision: Number of times that a collision is detected later
than 512 bit-times into the transmission of a frame.
왏 Tx Excessive Collision: Number of frames that are not transmitted
because the frame experienced 16 transmission attempts.
왏 Packets 64 Octets: Number of 64-byte frames in good and bad
packets received.
왏 Packets 65-127 Octets: Number of 65 ~ 127-byte frames in good and
bad packets received.
왏 Packets 128-255 Octets: Number of 128 ~ 255-byte frames in good
and bad packets received.
왏 Packets 256-511 Octets: Number of 256 ~ 511-byte frames in good
and bad packets received.
왏 Packets 512-1023 Octets: Number of 512 ~ 1023-byte frames in
good and bad packets received.
왏 Packets 1024- 1522 Octets: Number of 1024-1522-byte frames in
good and bad packets received.
왏 Tx Packets: The counting number of the packet transmitted.
왏 TX Octets: Total transmitted bytes.
왏 Tx Unicast Packets: Show the counting number of the transmitted uni-
cast packet.
왏 Tx Broadcast Packets: Show the counting number of the transmitted
broadcast packet.
왏 Tx Multicast Packets: Show the counting number of the transmitted
multicast packet.
- LANCOM ES-2126+ 1
- LANCOM ES-2126P 1
- 쮿 Preface 4
- Information symbols 5
- Contents 6
- 쮿 Contents 7
- 1Introduction 10
- ES-2126+ 11
- 쮿 Chapter 1: Introduction 11
- Onyl for LANCOM 11
- LANCOM ES 13
- 2 Installation 15
- 쮿 Chapter 2: Installation 16
- 2.5 Software installation 20
- 3.1 Configuration options 22
- 3.2.1 Save/Restore 26
- 3.2.2 Config file 27
- 3.3.1 Ethernet port status 28
- 3.3.2 Port PoE status 29
- PoE class Use Power range 30
- 4.2 System 34
- 4.2.2 IP Configuration 35
- 4.2.3 Time Configuration 37
- 4.2.4 Account Configuration 40
- 4.2.5 Management Security 41
- 4.2.6 Virtual Stack 44
- 4.2.7 System Log 45
- 4.3 Port 46
- 4.3.2 Port Status 48
- 4.3.3 Simple Counter 51
- 4.3.4 Detail Counter 52
- 4.5 Loop Detection 57
- 4.6 SNMP Configuration 57
- 4.7 DHCP Boot 59
- 4.8 IGMP Snooping 60
- 4.9 VLAN 63
- - “ and “_” characters 65
- 4.9.3 PVID 67
- 4.10 MAC Table 69
- 4.11 GVRP Configuration 73
- 4.12 STP Configuration 78
- 4.12.2 STP Configuration 80
- 4.12.3 STP Port Configuration 81
- 4.13 Trunking Configuration 84
- 4.14 802.1x Configuration 89
- 4.15 TACACS+ 98
- AAA-SERVER 99
- 4.16 Alarm Configuration 103
- 4.16.2 E-Mail 104
- 4.17 Security 105
- Function name: 106
- 4.20 Diagnostics 119
- 4.20.2 Loopback 120
- 4.20.3 Ping 121
- 4.20.4 Watchdog 121
- 4.21 TFTP Server 122
- 4.22 Log 123
- 4.23 Firmware Upgrade 124
- 4.24 Reboot 125
- 4.25 Logout 126
- 5 Operation of CLI Management 127
- 5.2 Commands of CLI 128
- 5.2.1 Global Commands of CLI 129
- 5.2.2 Local Commands of CLI 135
- 6 Appendix 242
- 6.2 Connector wiring 244
Flowgistics Cas des tablettes manuels d'utilisation
La liste de Flowgistics Cas des tablettes produits contient 1 manuels d'utilisation pour les modèles 1. Tous les guides d'utilisation en format pdf peuvent être téléchargés ou consultés en ligne.
Komentarze do niniejszej Instrukcji